Tilt switches S04

S04 is our latest generation of high reliability tilt switch, with the following functions: When the switch is in a horizontal state, the circuit is in an open state. When the switch is tilted in four directions (front, back, left, and right) by more than 25 degrees, four different circuits are respectively turned on; When the switch is in an upright and vertical position, one of the circuits is turned on. In this state, if the switch is rotated 90 degrees in the up, down, left, and right directions, four different circuits are respectively turned on; This switch can replace G-sensor for direction recognition

Tilt switches X65

This series of tilt switches is based on a flexible design that can achieve angle detection or direction recognition in different application scenarios. Depending on the installation status, it can achieve omnidirectional tilt detection, vibration detection, flip detection in horizontal state, and unidirectional angle detection and state recognition in vertical or lateral state in different directions.

Tilt switches S07D

When the A terminal (trigger terminal) of the switch is within the range of 0-90 °, the circuit is generally in a disconnected state. When the A terminal (trigger terminal) is within the range of 90 ° -180 °, the circuit remains in a conducting state If the switch is always in the horizontal position, the circuit may be in a critical state of uncertain on/off. In this state, if the switch moves back and forth or detects displacement or vibration in the environment, it will output a pulse signal, which can be adjusted for sensitivity or filtered for false triggering signals through software.

Tilt switches S45

When the character side of the switch is facing up and in a horizontal position, the switch remains in a stable normally open state (OFF). When the switch tilts in any direction to reach the transition angle, it triggers the conduction circuit (ON).

Tilt switches BT45

This series of tilt switches is designed to be normally closed. When the character side of the switch is facing upwards and in a horizontal position, the switch remains in a stable normally closed state (ON). When the switch tilts in any direction to reach the transition angle, it triggers the circuit to disconnect (OFF).

CSX-SEN-350A

CSX-SEN-350A is a unidirectional triggered conductive tilt switch: When the switch is in the horizontal 0 ° position, the circuit is generally in a critical state of connection or disconnection. At this time, when the switch moves axially or impacts, alternating switch signals will be generated; When the A terminal (trigger terminal) is 0-90 ° above the horizontal plane, the circuit remains disconnected; 3. When the A end (trigger end) is below 0 ° of the horizontal plane, the switch will remain in a triggered conductive state. At this time, when there is vibration in the environment, the switch will continuously generate high and low level signals; Note: In the 0 ° horizontal state, the switch is in an uncertain on/off state, with a conversion angle tolerance of ± 10 °. Please carefully confirm if it is applicable.

Tilt switches CSX30

When the character side of the switch is facing up and in a horizontal position, the switch remains in a stable normally open state (OFF). When the switch tilts in any direction to reach the transition angle, it triggers the conduction circuit (ON). 1. Intelligent all-round 360 ° angle detection without dead corners for angle changes; 2. Fully automated production, multi-dimensional and multi angle full inspection and shipment.

Tilt switches CSX45

When the character side of the switch is facing up and in a horizontal position, the switch remains in a stable normally open state (OFF). When the switch tilts in any direction to reach the transition angle, it triggers the conduction circuit (ON). 1. Intelligent all-round 360 ° angle detection without dead corners for angle changes; 2. Fully automated production, multi-dimensional and multi angle full inspection and shipment.

Tilt switches CSX60

When the character side of the switch is facing up and in a horizontal position, the switch remains in a stable normally open state (OFF). When the switch tilts in any direction to reach the transition angle, it triggers the conduction circuit (ON). 1. Intelligent all-round 360 ° angle detection without dead corners for angle changes; 2. Fully automated production, multi-dimensional and multi angle full inspection and shipment.

Tilt switches CSX90

When the character side of the switch is facing up and in a horizontal position, the switch remains in a stable normally open state (OFF). When the switch tilts in any direction to reach the transition angle, it triggers the conduction circuit (ON). 1. Intelligent all-round 360 ° angle detection without dead corners for angle changes; 2. Fully automated production, multi-dimensional and multi angle full inspection and shipment.

Tilt switches 645B

When the switch is perpendicular to the ground, it remains in a stable normally open state (OFF). When the switch tilts towards any direction and reaches the transition angle, its internal gold-plated rolling ball immediately triggers the conduction circuit (ON) and outputs a low-level signal to trigger the operation of the microcontroller (MCU). 1. Intelligent all-round 360 ° angle detection without dead corners (generally applicable to P.C.B in a vertical installation state, symmetrical up and down without direction); 2. Conversion angles: 45 °

Tilt switches 660B

When the switch is perpendicular to the ground, it remains in a stable normally open state (OFF). When the switch tilts towards any direction and reaches the transition angle, its internal gold-plated rolling ball immediately triggers the conduction circuit (ON) and outputs a low-level signal to trigger the operation of the microcontroller (MCU). 1. Intelligent all-round 360 ° angle detection without dead corners (generally applicable to P.C.B in a vertical installation state, symmetrical up and down without direction); 2. Conversion angles: 30 °